一，开孔要求：

1、 Opening requirements:

根据设计院的施工图，需要对墙板和天花板的工艺开口进行两次设计，并准确定位各个孔。在生产和加工过程中，孔的外围用镀锌槽钢和周围的钢镀锌型材焊接并密封。除上述要求外，电源插座还预埋有线槽或PVC管。所有孔一次都在生产线上形成，以确保不暴露岩棉复合板。

According to the construction drawings of the design institute, it is necessary to design the process openings of the wall panels and ceilings twice and accurately locate each hole. During production and processing, the periphery of the hole is welded and sealed with galvanized channel steel and surrounding steel galvanized profiles. In addition to the above requirements, power sockets are also pre embedded with cable trays or PVC pipes. All holes are formed on the production line at once to ensure that the rock wool composite board is not exposed.

二，墙体组装要求：

2、 Wall assembly requirements:

壁板与地面之间的连接应由管理人员连接。地板与壁板，壁板与天花板，壁板与壁板之间的转角处应安装R形铝合金条；

The connection between the wall panel and the ground should be made by management personnel. R-shaped aluminum alloy strips should be installed at the corners between floors and wall panels, between wall panels and ceilings, and between wall panels;

墙与墙之间的连接应采用中子铝合金或镀锌矩形管连接，表面不得有不平整的表面；

The connection between walls should be made of neutron aluminum alloy or galvanized rectangular pipes, and there should be no uneven surface on the surface;

壁板上的门窗应该是独立的，不允许打开壁板。

The doors and windows on the wall panel should be independent and opening the wall panel is not allowed.

90°C的壁跃迁通过静电配色铝合金柱传递。

The wall transition at 90 ° C is transmitted through an electrostatic color matching aluminum alloy column.

三，车顶组装要求：

3、 Roof assembly requirements:

岩棉复合板和岩棉防火复合彩钢房屋板面的连接处均用穿孔螺栓固定，以确保其稳定性和强度。彩色钢岩棉屋顶与民用建筑墙的交点处，将特殊的配色型材与民用建筑墙连接起来，以确保其强度和美观；

The connection between rock wool composite panels and rock wool fire-resistant composite color steel building panels is fixed with perforated bolts to ensure their stability and strength. At the intersection of the colored steel rock wool roof and the civil building wall, special color matching profiles are connected to the civil building wall to ensure its strength and aesthetics;

顶板和顶板之间的连接分为主梁连接和副梁连接，并且这些连接都是内部连接，并且不允许该表面具有不平坦的表面。主梁和副梁应满足屋顶的承载要求；

The connection between the top plate and the top plate is divided into main beam connection and auxiliary beam connection, and these connections are all internal connections, and the surface is not allowed to have an uneven surface. The main and auxiliary beams should meet the bearing requirements of the roof;

吊架由ф10镀锌线材，水平调节器和锁组成。

Hanger made of ф 10 galvanized wire, consisting of a horizontal adjuster and a lock.

板的界面要用硅胶密封。嵌入板中的密封胶应笔直且光滑，并且不应有中断，暴露或毛刺以确保其气密性；

The interface of the board should be sealed with silicone. The sealant embedded in the board should be straight and smooth, and there should be no interruption, exposure, or burrs to ensure its airtightness;

有了济南复合板厂上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：http://www.jnjgcg.com或者来电咨询，我们会尽全力为您解决

With the summary above from Jinan Composite Board Factory, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.jnjgcg.com Or call to inquire, we will do our best to solve it for you