Color steel composite panels can be often seen in our daily life, with the characteristics of convenient construction, light weight, and hard strength. The adhesive for composite boards is not only easy to operate and has high bonding strength, but also uses a scientific pre polymerization modification process to improve the initial adhesion of the adhesive and make it bond more firmly. The following will introduce its usage methods.

彩钢复合板板材的粘胶面要求清洁，干燥，无油脂。

The adhesive surface of the color steel composite board should be clean, dry, and free of grease.

胶粘剂主剂在取出前要充沛搅拌均匀。

The main adhesive agent should be thoroughly stirred and evenly mixed before removal.

彩钢复合板板材施胶面如有涂层，油漆等轻先做试验，胶水施胶温度为5度-40度之间。

If there is a coating or paint on the adhesive surface of the color steel composite board, the test should be conducted first, and the adhesive application temperature should be between 5-40 degrees Celsius.

复合前要确保胶水表面没有干，以防影响粘结效果。

Before compounding, ensure that the surface of the adhesive is not dry to prevent affecting the bonding effect.

常温（25度）压合需要4个小时，操作时根据实践温度延伸或缩短压合时间。

Pressing at room temperature (25 degrees Celsius) takes 4 hours, and the pressing time should be extended or shortened according to the actual temperature during operation.

胶水初始固化后，把彩钢复合板放到一边，一周后方可用于工程。

After the initial solidification of the adhesive, place the color steel composite board aside and use it for one week before it can be used in the project.

本文由济南复合板厂友情奉献.更多有关的知识点击:http://www.jnjgcg.com我们将用真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from Jinan Composite Plate Factory. For more relevant knowledge, click on: http://www.jnjgcg.com We will provide you with comprehensive services with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned