彩钢板是指彩涂钢板，彩涂钢板是一种带有有机涂层的钢板。彩钢板分为单板、彩钢复合板、楼承板等。

Color coated steel plate refers to a type of steel plate with an organic coating. Color steel plates are divided into single plate, color steel composite plate, floor bearing plate, etc.

具体区别如下：

The specific differences are as follows:

1、炼制过程中，彩涂板的基板是用于涂覆涂料的钢带，彩涂板的正反面处理上及其重要，通常彩涂板两个表面中对颜色、涂层性能、表面质量等要求较高。彩涂板具有很强的硬度及柔韧性，它的涂层抵抗擦划伤、摩擦、碰撞、压入等机械作用的能力，彩涂板的涂层与基板共同变形，且不发生破坏的能力。

1. During the refining process, the substrate of the color coated plate is a steel strip used for coating. The front and back treatment of the color coated plate is extremely important. Usually, the two surfaces of the color coated plate have high requirements for color, coating performance, and surface quality. Color coated board has strong hardness and flexibility, and its coating has the ability to resist mechanical effects such as scratches, friction,
collision, and pressing. The coating of color coated board deforms together with the substrate without damage.

彩涂板从生产结束时开始，在原始涂层的性能下降到必须对其进行大修才能维持其对基板的保护作用的间隔时间。在使用影响下及上时间会逐渐老化，就必须进行一次大的修理，才可以使它的耐久性更长。

The interval between the performance of the original coating and the need for major repairs to maintain its protective effect on the substrate, starting from the end of production, for color coated boards. Under the influence of use and over time, it will gradually age, so a major repair must be carried out to make its durability longer.

2、彩钢板是以冷轧钢板为基材，对其进行脱脂、磷化处理后，在氮气的保护下进行双面热镀锌，在施以易于底漆牢固粘附的化学转化膜，然后涂上环氧树脂底漆，涂上耐化学腐蚀的彩色面漆，使他成型。彩板是彩色钢板，是在钢板上涂覆了一层高分子材料，有单面双面之分，以单面居多，表面还可以印上图案。

2. Color steel plate is made of cold-rolled steel plate as the substrate. After degreasing and phosphating treatment, it is hot-dip galvanized on both sides under the protection of nitrogen gas. A chemical conversion film that is easy to firmly adhere to the primer is applied, followed by an epoxy resin primer. Finally, a chemically resistant color topcoat is applied to shape it. Color plate is a colored steel plate coated with a layer of polymer material, which can be divided into one side and two sides, with single side being the majority. The surface can also be printed with patterns.