随着人们观念的不断变化，房屋装修不仅仅是为了简单的居住，人们更加注重装饰和美观的体现。彩钢瓦是一种屋顶装修的新型建筑材料，那么它是如何制作的呢？下面济南彩钢瓦厂为您分析：

With the continuous changes in people's concepts, house decoration is not only for simple living, but also for the reflection of decoration and aesthetics. Color steel tile is a new type of building material for roof decoration, so how is it made? Below, Jinan Color Steel Tile Factory will analyze for you:

1.流水线启动后，将合格的瓷砖白板(或配件白板)依次放置在输送网架上，开启底漆喷枪自动喷涂瓷砖上表面，确保表面涂有底漆；

1. After the assembly line starts, place qualified ceramic tile whiteboards (or accessory whiteboards) on the conveyor network frame in sequence, activate the primer spray gun to automatically spray the upper surface of the ceramic tiles, ensuring that the surface is coated with primer;

2.瓷砖立即进入彩砂铺撒工序，保证彩砂均匀铺撒在其表面，并表面多余的浮砂；

2. Immediately enter the sand spreading process for ceramic tiles, ensuring that the sand is evenly spread on their surface and removing excess floating sand on the surface;

3.然后经过烘房三段烘干过程，保证底漆及时烘干，充分粘结彩砂；

3. Then, after a three-stage drying process in the drying room, ensure that the primer is dried in a timely manner and fully bonded to the colored sand;

4.继续打开喷枪自动将面胶喷到瓷砖上表面，确保瓷砖表面被面胶覆盖；

4. Continue to turn on the spray gun and automatically spray the surface adhesive onto the tile surface, ensuring that the tile surface is covered by the surface adhesive;

5.将瓷砖送入两段烘房的烘干过程，保证面胶及时干燥，充分粘结彩砂；

5. During the drying process of sending ceramic tiles into a two-stage drying room, ensure that the surface adhesive dries in a timely manner and fully adheres to the colored sand;

6.通过烘房及时收集已完成生产工序的成品瓷砖，通过清点整齐堆放在木质托盘上；

6. Collect finished ceramic tiles that have completed the production process in a timely manner through the drying room, and stack them neatly on wooden pallets through counting;

7.工匠应对待检瓷砖进行抽样检验，做好质量记录，然后入库堆放。

7. Craftsmen should conduct sampling inspection on the tiles to be inspected, keep quality records, and then store them in storage.

为更好地利用彩钢瓦，延长其使用寿命，我们需要对钢板进行清洗，以确保其亮度，延长其使用寿命，提高其美观度。因此，它还有很多清洁注意事项，主要有以下几点:

To better utilize colored steel tiles and extend their service life, we need to clean the steel plates to ensure their brightness, extend their service life, and improve their aesthetics. Therefore, it also has many cleaning precautions, mainly including the following points:

操作人员负责用钢板清洗机清洗钢板，并登记清洗记录。如机器在清洗或风干时需要停止，请按下清洗停止按钮。如需紧急停机，只需按下紧急停机按钮即可。

The operator is responsible for cleaning the steel plate with a steel plate cleaning machine and registering the cleaning record. If the machine needs to stop during cleaning or air drying, please press the cleaning stop button. If an emergency stop is required, simply press the emergency stop button.

彩钢瓦清洗机使用的清洗溶剂为无铅清洗剂。为正常使用清洗机，每周应加入20升清洗液，每周更换一次溶剂罐内滤纸。

The cleaning solvent used in the color steel tile cleaning machine is lead-free and environmentally friendly cleaning agent. To use the cleaning machine normally, 20 liters of cleaning solution should be added every week and the filter paper in the solvent tank should be replaced once a week.

操作人员在清洗钢板时不需要采取溶剂保护措施，在添加溶剂时要戴橡胶手套或塑料手套和口罩。更多相关事项就来我们网站http://www.jnjgcg.com咨询！

Operators do not need to take solvent protection measures when cleaning steel plates, and should wear rubber gloves or plastic gloves and masks when adding solvents. For more related matters, come to our website http://www.jnjgcg.com consulting service