说到复合板大多人应该都是比较熟悉的吧，而且在装修的时候基本上都是会和它打交道的，它的运用也比较广泛，比如说装饰或者家具制作等等，可见人们对这种材料的喜爱，那么复合板原材料是什么？它的施工工艺和特点都有哪些？下面就听济南复合板厂详细的讲解一下。

When it comes to composite board, most people should be familiar with it, and they will basically deal with it when decorating. It is also widely used, such as decoration or furniture manufacturing. It can be seen that people like this material, so what is the raw material of composite board? What are its construction processes and characteristics? Now let's listen to the detailed explanation of Jinan Composite Plate Factory.

一、复合板原材料是什么？

1、 What is the raw material of composite plate?

复合板的原材料基本是钢材或者是木板所做成的，所使用的这些原材料都是绿色无污染的，对人的健康和周围的环境都是不会产生任何的负面影响的，是值得信赖的装修材料。复合板的使用年限在同类型装修材料中是较为长的，长达二十年大约，这也是更加多的人自由选择复合板的原因，其是经济实惠的，性价比十分高，是值得购置的。

The raw materials of the composite board are basically made of steel or wood. The raw materials used are green, environment-friendly and pollution-free, and will not have any negative impact on human health and the surrounding environment. They are trustworthy decoration materials. The service life of composite board is relatively long among the same type of decoration materials, about 20 years long, which is also the reason why more people choose composite board freely. Its price is economical and cost-effective, and it is worth purchasing.

二、复合板施工工艺

2、 Construction process of composite plate

1、对于基层面处理：墙面应清理干净无灰、油污等妨碍粘结的附着物。在基层墙体验收合格之后,抹水泥砂浆找平层。

1. For the treatment of base course surface: the wall surface shall be cleaned and free of dust, oil and other attachments that hinder bonding. After the acceptance of the base wall, the cement mortar leveling layer shall be plastered.

2、挂线施工：按照建筑立面设计和外墙保温技术要求。在粘板、抹面层砂浆等全部施工工序中,须在建筑外墙大角及其他要处挂垂直基准钢线。这是为了控制外墙外保温施工的垂直及平整度。

2. Line hanging construction: in accordance with the building facade design and the technical requirements for external wall insulation. In all construction processes such as gluing and plastering mortar, the vertical reference steel line must be hung at the large corner of the building exterior wall and other important places. This is to control the verticality and flatness of the external wall thermal insulation construction.

3、粘贴板：排粘贴前应按设计要求绘排板图,确定异型板的规格和数量,并在基层上用墨线弹出板块位置图。

3. Pasting board: before pasting, draw the board layout according to the design requirements, determine the specification and quantity of the special-shaped board, and use ink lines to pop up the board position map on the base layer.

4、锚栓固定：锚栓固定时,其规格、位置、数量、锚固深度和拉拔力要符合设计要求。锚栓固定要在粘贴板后的2到4小时后开始

4. Anchor bolt fixation: When the anchor bolt is fixed, its specification, position, quantity, anchoring depth and pulling force shall meet the design requirements. Anchor bolt fixation shall be started 2 to 4 hours after pasting the plate

5、面层施工：在板固定后经检查验收,进行抹面胶浆防护层施工。

5. Surface course construction: after the plate is fixed, the plastering mortar protective layer construction shall be carried out after inspection and acceptance.

以上的这些内容就是小编为大家详细讲解的关于复合板原材料是什么以及它的施工工艺和特点都有哪些的相关知识，相信大家都清楚了吧，复合板施工简单、便宜、性能优异等众多特点，而深受消费者的喜爱和追捧。您有需求就来我们网站http://www.jnjgcg.com咨询吧！

The above contents are the relevant knowledge about the raw materials of composite plate and its construction technology and characteristics that Xiaobian explained in detail for you. I believe you all know that the composite plate has many characteristics, such as simple construction, cheap price, excellent performance, and so on, and is deeply loved and pursued by consumers. Come to our website if you need http://www.jnjgcg.com Ask!