I believe you are no stranger to color coated steel plate. After all, it is very common in our life and has been recognized by consumers with many advantages. Color coated steel plate is a kind of steel plate with coating. Color steel plate is divided into veneer, color steel composite plate, floor bearing plate, etc. It is widely used in the walls and roofs of large public buildings, public workshops, movable plank houses and integrated houses. The substrates of Jinan color steel plate are cold-rolled substrate, hot-dip galvanized substrate and electro galvanized substrate. Coatings can be divided into polyester, silicon modified polyester, vinylidene fluoride and plastic sol.

彩钢板的表面状态可分为涂层板、压花板和印花板，彩钢板广泛用于建筑家电和交通运输等行业，对于建筑业主要用于钢结构厂房、机场、库房和冷冻等工业及商业建筑的屋顶墙面和门等，民用建筑采用彩钢板的较少。

The surface state of color steel plate can be divided into coated plate, embossed plate and printed plate. Color steel plate is widely used in construction, household appliances, transportation and other industries. For the construction industry, it is mainly used for the roof, wall and door of industrial and commercial buildings such as steel structure workshop, Airport, warehouse and refrigeration, and less color steel plate is used in civil buildings.

彩钢板在运输过程中应注意以下几点：

The following points shall be paid attention to during the transportation of color steel plate:

1、运输货物的车辆选用——应根据机房墙板的规格尺寸种类来选择合适的运输车辆型号。一般选用大型的专用拖车运输。

1. Selection of vehicles for transporting goods - the appropriate transport vehicle model shall be selected according to the specification, size and type of the wall panel of the machine room. Large special trailers are generally used for transportation.

2、彩钢板墙板在装车时，应提前将机房墙板和配件按型号种类等条件分装好，并且要捆绑牢固稳定以防止金属面被磨损或划伤。

2. When loading the color steel plate wallboard, the wallboard and accessories of the machine room shall be separately assembled according to the model, type and other conditions in advance, and shall be bound firmly and stably to prevent the metal surface from being worn or scratched.

3、在运输过程中应将机房墙板稳定牢固的绑扎在车上，并且应使用木楔等临时固定的措施来避免因车身晃动所引起的松动和挤压变形等现象的发生，从而降低金属表面磨损或划伤的几率。

3. During transportation, the wallboard of the machine room shall be stably and firmly bound on the vehicle, and temporary fixing measures such as wooden wedge shall be used to avoid loosening and extrusion deformation caused by the shaking of the vehicle body, so as to reduce the probability of wear or scratch on the metal surface.

在运送过程中应将彩钢板板安稳结实的绑扎在车上，而且应运用木楔等暂时固定的办法来防止因车身晃动所引起的松动和揉捏变形等现象的发作，然后下降金属外表磨损或划伤的几率。彩钢板当运送板材时，应留意运送板材的高度是否超出了拖车的长度，而且要进行相应的防止倾覆作业。

In the process of transportation, the color steel plate shall be securely and firmly bound on the vehicle, and the wooden wedge and other temporary fixing methods shall be used to prevent the occurrence of loosening and kneading deformation caused by the shaking of the vehicle body, and then reduce the probability of wear or scratch on the metal surface. When transporting plates, pay attention to whether the height of the transported plates exceeds the length of the trailer, and carry out corresponding anti overturning operations.

4、济南彩钢板当运输板材时，应注意运输板材的高度是否超出了拖车的长度，并且要进行相应的防止倾覆工作。

4. Jinan color steel plate when transporting plates, pay attention to whether the height of the transported plates exceeds the length of the trailer, and carry out corresponding anti overturning work.

进行将机房墙板绑扎在车上的工作时，选用同等板长的角钢或者角铁放置在机房墙板两边的转角处，这样可均匀分配绳索捆扎的压力，起到避免压力集中而损坏压磨(压凹)机房墙板的边缘。如果远距离运输或路况不佳运输时，则要求金属面机房墙板采用水平放置的方法。

When binding the machine room wallboard on the vehicle, angle steel or angle iron with the same plate length shall be selected and placed at the corners on both sides of the machine room wallboard on the top floor, so as to evenly distribute the pressure of rope binding and avoid damaging the edge of the machine room wallboard due to pressure concentration. In case of long-distance transportation or poor road conditions, the metal faced machine room wallboard shall be placed horizontally.

5、彩钢板在运输机房专用墙面钢板时，钢面墙板的支点处挑出长度不宜大于1.0米，以确保材料不会变形磨损。若有超过2米以上的墙板时，挑出相应的板材并在其在尾部整体捆扎好，以避免因汽车尾部的波震造成过大挠度面损坏机房的墙板。

5. When the color steel plate is used to transport the special wall steel plate in the machine room, the length of the fulcrum of the steel wall plate should not be greater than 1.0m to ensure that the material will not be deformed and worn. If there is a wallboard more than 2m, pick out the corresponding board and bind it at the tail as a whole, so as to avoid damaging the wallboard of the machine room due to excessive deflection caused by the wave vibration at the rear of the car.

6、彩钢板搬运板材时应两头同时抬起，以免损坏表面氧化膜或涂层。

6. When transporting the color steel plate, both ends shall be lifted at the same time to avoid damaging the surface oxide film or coating.

本文由济南彩钢板为您提供，我们的网站是：http://www.jnjgcg.com我们将以全心全意的热情为您提供服务，欢迎您的访问

This article is provided by Jinan color steel plate. Our website is: http://www.jnjgcg.com We will provide you with services with wholehearted enthusiasm. Welcome to visit