The color steel tile deformation we see is mainly due to the ability of the color tile to contain some water to reduce the pressure, so there will be deformation, so the color steel tile drying treatment is an important process in manufacturing engineering, so what is the commonly used drying treatment and polishing method.

　　常用的干燥方法是建立自己的窑对彩钢砖原料进行干燥处理，降低干燥产品的成本。由于土窑是选择人工炕加热的方法，温度不均匀，往往会出现部分已烘干，而部分仍有大量水分，没有很好的控制开裂和变形的概率。

　　The commonly used drying method is to establish its own kiln to dry the raw materials of color steel brick, so as to reduce the cost of drying products. Because the earth kiln is a method of heating the artificial Kang, the temperature is not uniform, often some of them have been dried, but some of them still have a lot of water, so there is no good control of the probability of cracking and deformation.

　　所以除了次蒸汽干燥外，在加工前，还要进行第二次微波干燥，是的，水可以从内到外平衡蒸腾。彩钢地砖在施工的时候，需要对彩钢地砖进行抛光，其目的是为了坚持其美观，保证施工的。对其磨削方法分为干法磨削、湿法磨削和机械磨削三种。

　　So in addition to the first steam drying, the second microwave drying should be carried out before processing. Yes, water can balance transpiration from inside to outside. During the construction of color steel floor tiles, it is necessary to polish the color steel floor tiles in order to adhere to their beauty and ensure the safety of construction. The grinding methods are divided into dry grinding, wet grinding and mechanical grinding.

　　机械抛光彩钢地砖大面积施工，为了提高工作效率，可以选择机械研磨的方法，如电动研磨机，有圆盘式和振动式两种。砂纸用于干式抛光，适用于抛光硬脆性涂料。彩钢地砖抛光的缺点是在操作过程中会产生大量的粉尘，影响环境卫生。

　　In order to improve the working efficiency, we can choose the mechanical grinding method, such as electric grinder, there are two kinds of disc type and vibration type. Sandpaper is used for dry polishing and for polishing hard brittle coating. The disadvantage of color steel floor tile polishing is that it will produce a lot of dust in the process of operation, which will affect the environmental health.

　　湿磨水砂纸蘸水或肥皂水光泽彩钢瓦,水可以减少磨痕,涂层润滑程度,砂纸,,但应注意水基层喷漆后,一个是等待水基涂料层完全干透后,水或其他简单的白色漆层,也不宜吸收剂强有力的衬底。

　　Wet ground water sandpaper dipped in water or soapy water can polish color steel tile. Water can reduce abrasion mark, coating lubrication degree, sandpaper and energy saving. However, it should be noted that after spray painting of water base layer, one is to wait for the water base coating layer to dry completely, water or other simple white paint layer, and it is not suitable for strong absorbent substrate.