According to the introduction of previous issues, I believe you are not unfamiliar with color steel plate, but you are not familiar with the daily maintenance and cleaning protection methods of color steel plate. Today, we share the cleaning and maintenance knowledge of color steel plate.

　　1、彩钢板干燥2—3个小时再涂刷冰漆一遍，再过3小时涂刷第二遍。

　　1. The color steel plate shall be dried for 2-3 hours and then painted with ice paint once, and then painted for the second time after 3 hours.

　　2、脊瓦与屋面瓦棱板搭接波谷处可用泡沫堵头填塞防水胶漆两遍，以防渗水泛水。

　　2, the ridge tile and the roof tile edge plate overlap trough can use the foam plug to fill the waterproofing varnish two times, in order to prevent seepage water flooding.

　　3、彩钢板原突出部分硅酮胶密封，使板缝整齐，施工面要干燥，清洁干净。

　　3. Remove the silicone rubber seal of the original protruding part of the color steel plate to make the joints neat, the construction surface dry and clean.

　　4、遇到搭接处间隙大于5mm—30mm，如果需要加强附着力，请再加用1层耐碱碱聚酯 布；再过3小时涂刷第三遍防水胶漆。　　4. If the gap at the lap joint is more than 5mm-30mm, if you need to strengthen the adhesion, please use another layer of alkali resistant polyester cloth; brush the third time of waterproof paint in 3 hours.

　　5、先用胶漆底涂，再用耐碱聚酯布覆盖涂刷面，紧接再涂刷防水胶漆。

　　5. First, apply the primer with adhesive paint, then cover the painting surface with alkali resistant polyester cloth, and then apply the waterproof adhesive paint.

　　6、拉铆钉及自攻丝钉眼处可用毛刷粘防水胶漆直接涂盖钉眼四次，厚度约1.5mm左右，直径在 50mm左右，下一次涂刷以上一次涂层不粘手为准。

　　6. For rivets and self tapping rivet holes, the waterproof adhesive paint can be directly applied to cover the rivet holes for four times with a thickness of about 1.5mm and a diameter of about 50mm. The next time the above coating is applied, the coating will not stick to hands.

　　以上就是小编介绍的彩钢板的知识，希望可以对大家带来帮助。如果想了解更多相关信息，请继续关注我们网站我们会不断为大家更新。

　　The above is the knowledge of color steel plate introduced by Xiaobian. I hope it can help you. If you want to know more about it, please keep your eyes on our website and we will keep updating it for you.